1、 该机采用PLC微电脑控制程序进行整机运行。2、 各组份恒温可循环使用并可无极预选择后、所需的混合比，原液混合采用锥度式螺杆型搅拌器，通过16000-18800转/分速度混合，混合室和螺杆可自行机械清洗（无需清洗液），喷料口装用机械手能自动清洁料嘴。1. The equipment adopts the PLC microcomputer control procedures to run. 2. Each component can be used circularly at a constant temperature and we can make a nonpolar preconcentration of mixing ratio. It adopts taper type and screw type to mix the raw material at the speed of 16000-18000 rad/min. The mixing chamber and screw are mechanical cleaned automatically. (No need cleaning agent).The manipulator that the feed opening adopted can clean off remained material automatically.