320（PU）聚氨酯浇注透明弹性体两用机性能特点： 1、配有两种不同搅拌器进行不同转速的混合装置，用以生产聚氨酯制品或聚氨酯透明体制品。 2、设定不同工位的浇注量后用不同转速搅拌混合浇注，可连续生产。 3、制作透明体必须启动真空机，对料罐内原液进行除湿、脱泡处理，使作出制品透明度好。 4、浇注头配有冷却装置，如配上制冷机，使设备保持一定恒湿，能延长浇注次数，同时能延长浇注头使用寿命。 原料输送管道采用导热层循环保温，料罐采用导热油夹层循环保温及硬泡夹层双层保温，使电耗省节能。 Performance characteristics: 1. The equipment is equipped with two different mixer to mix at different speed. It can manufacture polyurethane products or polyurethane elastomer products. 2. It can work continuously by setting different location and speed. 3. You must start the vacuum machine to dehumidify and defoam the raw material in the material tank for manufacturing the products with high transparency. 4. The casting head is equipped with refrigerating device, for example, the refrigerating machine to maintain the equipment at constant humidity. This measure can extend equipment's pouring number and the pouring head's service life. The raw material conveying pipes adopt thermal layer to get a cyclic heat preservation. The material tanks adopt conduction oil and hard bubble interlayer to keep the temperature and it can save electricity.