产品品牌：长崎科技TAKY

产品型号：TK-ZG

类型：箱式

操作方式：连续式

干燥介质：空气

加热方式：对流式

工作类型：对流式

产品简介：

主要为电子零部件、工业材料、成品在研发、生产和检验各环节的试验提供干燥、烘焙、及精密高温真空老化试验，适用于LED、电池、电子电工、电气自动化、通讯、化工、五金、橡胶、等行业。

一、适用范围Range ofapplication

适用于科研单位、专业院校、电子、工矿等企事业单位的生产、实验现场，模拟在真空状态下对成品、半成品、原材料进行高温老化实验。

It can be used on research and development institution, specialty universities,electronics, industrial and mining enterprises and other enterprises such asproduction, experiment site, the simulation under the vacuum state to finishedproducts, semi-finished products and raw materials for high temperature agingtest.

二、产品结构特点ProductFeature

1．箱体采用优质冷轧钢板，表面静电喷涂，防锈能力极强。

The cabinets use the cold-roll steel sheets, electrostaticspraying on surface, have strong rust protection function.

2．工作室为优质不锈钢板，四周圆角、光滑，工艺水平良好。

Theworkroom used stainless steel plate, and with fillet all around, smooth, high technologicallevel.

3．箱体与工作室之间，充填超细玻璃棉隔热材料，保温功能良好，能有效保证箱内实验温度。

Super thin glass cotton filling with boxand work room, good insulation function, and also can keep experimentaltemperature in the chamber.

4．箱门为双层玻璃稳固结构，隔热性能良好，实验观察方便。

Double-glazingused on chamber door, and its have good insulation function, convenient toobserve experiment.

5．工作室与玻璃门之间装有耐热橡胶密封圈，密封性良好。

Between studio andglass door is equipped with heat resistant rubber seal, sealing is good.

6．加热器均匀安装在工作室内壁的外表面，良好保证箱内温度的均匀性。

To evenly ensure the inner temperatureof the case, the heater should be properly installed on the inner wall of theworking chamber

7．温度控制采用微电脑智能数字技术，控温精度高、抗干扰能力强，操作方便。

Temperaturecontroller uses the microcomputer digital technique, high temperature controlaccuracy, strong antijamming capability, easy to operate.

三、主要技术参数 Technicalparameters

型号Type 参数	TK-GH-Z27	TK-GH-Z64	TK-GH-Z125	TK-GH-Z216
工作室尺寸 WxDxH mm	3O0×300×300	400×400×4O0	500×500×500	600×600×600
配搁板数Shelving	2
控温范围Temperature control range	RT ～ 300℃( 500℃)
真空极限度Vacuum limit	约100Pa
温度波动Temperature fluctuation	±1.0℃
电源电压Power voltage	220V、50Hz