Digital Readouts: LG10,LH30,LH51,LH70
Linear Encoders:GB-ER,GB-A,MSS-101,SD-608,SJ-300,SJ-700,SJ300A,SL-110,SL220,SL-331,SL-700,SR-118,SR-127,SR-33/34SR-801
Digital Gauges:DE-BR,DG-10B,DG-110B,DG-50BDG-805,DG-MDK-802/812,DL-B,DL-BR,DR-12N,DR-32NV,DT-512,LT-10,LT-11LT-20LY-51LY-52LY-71/72MG-SeriesMT-10U-Series
Measuring Accessories:BD-95,MD-10,MD-20A,MD-21,MJ-100,MJ-500,MJ-620,MJ-820,MJ-830,PH-100,PL-101,PL-30,PL-80,PL-81,SET-B3,SET-P15
SONY数显表LG10系列:LG10-1、LG10-2、LG10-3
LH71A:LH71-1/LH71-2/LH71-3
以紧凑尺寸多样的选择,灵活对应车床用高性能显示单元。
车床的功能
最小表示量转换
区间误差校正
保存数据
复位/预置
测量原点检测单位
程序功能
缩放
车床式样(工具)坐标/加机能
电源另售AC适配器(PSC -21)是很必要的。
LH70/71
LH70/71 Display Counter Pricing |
||
Model |
De |
MSRP |
LH70-1 |
Single Axis LH70 Display |
$600.00 |
LH70-2 |
Two Axis LH70 Display |
$710.00 |
LH70-3 |
Three Axis LH70 Display |
$815.00 |
LH71-1 |
Single Axis LH71 Display |
$700.00 |
LH71-2 |
Two Axis LH71 Display |
$810.00 |
LH71-3 |
Three Axis LH71 Display |
$915.00 |
Display Specifications
Model Name |
LH70-1 |
LH70-2 |
LH70-3 |
LH71-1 |
LH71-2 |
LH71-3 |
Item |
||||||
Display Axes |
1 |
2 |
3 |
1 |
2 |
3 |
Display |
7 digits and "-" display. Amber LEDs |
|||||
Connectable measuring Units |
SJ300 Series (Direct). |
|||||
Scale Input resolution |
Basic: 0.1μm, 0.5μm, 5μm, 10μm, 1s, 10s, 1min, 10min |
|||||
Display resolution* |
Basic: The above and their diamter displays |
|||||
Input signal |
A/B Quadrature signal, Z signal (Equivalent with RS-422) |
|||||
Mh. phase input difference |
100ns |
|||||
Alarm display |
Scale disconnected / Excess speed / Data Overflow / Power failure / Error in stored data |
|||||
Preset/Recall function |
3 items |
|||||
Mulit datum point |
10 |
150 |
||||
Tool offsets (for Lathe) |
- |
12 |
- |
99 |
||
Axis Summing |
- |
Same as LH71 |
- |
Sum of 2 axes |
||
Display Hold |
- |
Same as LH71 |
- |
The displayed value can be held and the datum entered |
||
Ref. point function |
The absolute zero point can be detected and the datum point can be re-established. (Requires a scale with a reference point) |
|||||
Bolt hole circle |
- |
Same as LH71 |
- |
Input diamter, start angle, stop angle, No. of holes |
||
Radius cutting function |
- |
Same as LH71 |
- |
Input radius, Tool diameter, feed angle |
||
Data storage |
Stores the value dispalyed before power loss and the last preset datum |
|||||
Max. linear error compensation |
±600μm/m |