中国上海托菲机电科技有限公司光电增量式编码器ETF38.ETF38-D编码器参数:外径38mm.实心轴径 5 6 8mm.防护等级IP65.最大脉冲2500PPR.工作电压5VDC9to26VDC.响应频率300KHz工作电压...........................5VDC9-26VDC消耗电流........................... 200mA消耗功率........................... 4W输出信号（5VDC)...................Push-PullTTL_RLINEDRIVEROPENC信号形式.......................方波输出电流....................... 20mA上升、下降时间.................. 200nS输出频率........................ 300KHz幅值........................... 0 0.5VDC 1 +2.4VDCMAX4.5VDCA、B信号准确率信号宽度........................1T 1/8T信号相位差......................1/4T 1/8T0位信号宽度.....................1/4T-6/4T绝缘............................... 10M 耐压...............................500V1min分辨率.............................10-2500PPR环境参数:工作温度...........................0℃to+70℃-40℃to+100℃储存温度...........................-30℃to+80℃环境湿度...........................85%(不结露)防护等级.........................IP65机械参数最大转速............................6,000RPM(max)轴负载.............................Axial20N,Radial30N重量............................... 0.2kg最大角加速度........................ 10rad/S启动转距20℃........................0.001N.m抗震性能震动(50-2000Hz)................. 100m/S(55...2000Hz)冲击(11ms)....................... 500m/S(during6mS)外壳...............................LY12轴.................................2Cr13轴径............................... 5 6 8mm连接类型...........................2m电缆径向出线式;2m电缆轴向出线式...........................5芯8芯 M12M16轴向插头式ETF38+(用户参数)脉冲1024PPR;电源电压9-26VDC; 输出信号AA-BB-OO-;输出形式Push-Pull推挽式轴径6mm;连接方式为径向电缆连接;使用温度.注:可根据OEM用户要求特殊设计,生产.