中国上海托菲机电科技有限公司ETF50IncrementalEncoderETF50ETF50光电增量式编码器订购示列:ETF50+(用户参数)脉冲1024PPR;电源电压9-26VDC;输出信号AA-BB-OO-;输出形式Push-Pull推挽式轴径6mm;连接方式为径向电缆连接;使用温度.注:可根据OEM用户要求特殊设计,生产. ETF50外径50mm.实心轴径Φ6Φ8Φ10mm.防护等级IP65.最大脉冲2500PPR.工作电压5VDC9to26VDC.响应频率300KHz电气参数:工作电压...........................5VDC9-26VDC消耗电流...........................≤200mA消耗功率...........................≤4W输出信号（9-26VDC).................Push-PullTTL_RLINEDRIVEROPENC信号形式.......................方波输出电流.......................≤20mA上升、下降时间..................≤1000nS 输出频率........................≥300KHz幅值..........................."0"≤0.5VDC"1"≥+8VDCMAX24VDC输出信号（5VDC)...................Push-PullTTL_RLINEDRIVEROPENC 信号形式.......................方波输出电流.......................≤20mA上升、下降时间..................≤200nS输出频率........................≥300KHz幅值...........................”0"≤0.5VDC"1"≥+2.4VDCMAX4.5VDCA、B信号准确率信号宽度.......................1T±1/8T信号相位差.....................1/4T±1/8T0位信号宽度....................1/4T-6/4T绝缘...............................≥10MΩ耐压...............................500V1min分辨率.............................10-2500PPR环境参数:工作温度...........................0℃to+70℃-40℃to+100℃ 储存温度...........................-30℃to+80℃环境湿度...........................85%(不结露) 防护等级...........................IP65机械参数: 最大转速...........................6,000RPM(max)轴负载.............................Axial50N,Radial80N重量...............................≈0.2kg最大角加速度........................≤10rad/S启动转距20℃........................0.02Ncm抗震性能震动(50-2000Hz).................≤100m/S(55...2000Hz)冲击(11ms)......................≤500m/S(during6mS)外壳...............................LY12 轴.................................2Cr13 轴径...............................Φ6Φ8Φ10mm连接类型...........................2m电缆径向出线式;2m电缆轴向出线式...........................5芯8芯M12M16轴向插头式