| 加入桌面 | 手机版
免费发布信息网站
贸易服务免费平台
 
 
发布信息当前位置: 首页 » 供应 » 机械及行业设备 » 阀门 » 蝶阀 » OPtiseal F14 F16 F15 F17蝶阀 阀座

OPtiseal F14 F16 F15 F17蝶阀 阀座

点击图片查看原图
品 牌: keystone 
型 号: F14 F15 F16 F17 
规 格: dn50-dn900 
单 价: 面议 
起 订:  
供货总量:
发货期限: 自买家付款之日起 3 天内发货
所在地: 广东 深圳市
有效期至: 长期有效
更新日期: 2023-12-13 11:02
浏览次数: 28
询价
公司基本资料信息
 
 
 
【OPtiseal F14 F16 F15 F17蝶阀 阀座】详细说明

      keystone OPtiseal F14 F16 F15 F17蝶阀 阀座   

keystone
Fig.optiseal.15 Fig14
蝶阀 Fig15蝶阀 keystone Fig15 Fig14 Fig16 Fig17气动蝶阀   F14 F15 F16 F17食品级阀门 阀座 F14气动蝶阀 F15气动阀门 F16气动蝶阀 F14食品级蝶阀 F14食品级阀座 F14啤酒蝶阀 F14糖厂阀门 F14对夹式蝶阀 F14阀座 F14胶圈 F14衬胶阀门 F14 EPDM阀座 F14 NBR阀座 F14手轮蝶阀 F14气动蝶阀 F14气动调节阀 F14气动开关蝶阀  F14气动调节阀门   F14阀门 F14阀座  TYCO KEYSTONE F14-F17系列蝶阀为调节型蝶阀,主要用于食品行业*Keystone标准顶法兰*薄阀板设计、适于调节*阀座易更换、耐蚀*阀杆两级密封*连接方式:对夹、支耳

TYCO KEYSTONE F14-F17系列蝶阀的详细介绍



TYCO KEYSTONE F14-F17系列蝶阀为调节型蝶阀,主要用于食品行业

泰科流体 基士敦 阀门为客户节约使用成本。



特点及优点

*Keystone标准顶法兰

*
薄阀板设计、适于调节

*
阀座易更换、耐蚀

*
阀杆两级密封

*
连接方式:对夹、支耳





标准规范

尺寸(mm):40~300
适用温度:-40~160℃
最大压力(MPa):1.6                                                 
阀体材质:铸铁、碳钢、碳钢
阀板材质:球铁、不锈钢、EPDM包覆钛材、Hastelloy
阀杆材质:不锈钢、碳钢、钛材
阀座材质:乙丙橡胶EPDM、zmw11294橡胶NBR、氟橡胶PTFE/EPDM





应 用

气泡级密封,流阻小,耐磨耐腐蚀,适用于食品,饮料,干物料运输,造纸,浆体处理等。

  The OptiSeal is a further development of previous, successful resilient seated valve designs. The range incorporates several features, even further enhancing the valve’s lifetime and performance
 

Features
• Top bushing absorbs actuator side thrust loads.
• Dirtscraper prevents moisture penetrating into the shaft area.
• Actuator flange acc. ISO 5211.
• High solid, glossy, silicone free, paint system ensuring excellent corrosion resistance.
• Extended body neck allows pipe insulation.
• Body locating holes ease installation and centering between the flanges.
• Sealed body splits prevent moistures from penetrating behind the seat (up to DN300).
• Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life and bubble-tight shut-off.
• The seat is field replaceable and fully isolates the body and stem from the flow.
• Primary stem sealing exceeds the pressure rating of the valve and prevents leakage through shaft area to atmosphere.
• A secondary shaft sealing provides back-up safety.
• A molded-in O-ring in the seat for flange sealing eliminates the need for gaskets.
• The thin disc provides the very minimum obstruction to flow (up to DN300).
• Top and bottom shaft bearings for optimized support and minimum friction in all body materials up to DN300, except cast iron.
• Relief hole drains possible fluids from the top plate recess space (up to DN300).
• Wafer and lugged body design, acc. ISO 5752/5 short. (DIN 3202, Part 3/K1).
• All valves comply to Pressure Equipment Directive (97/23/EU) Module H – CE Marking.
Available approvals: FDA, KTW/DVGW, KIWA, DGS, ABS, DNV, WRAS

Technical data
 
 
Pressure (bar)
: 10-16
 
End of line (bar)
: 6-10-16
 
Temperature (°C)
: -40 + 160
 
Sizes (mm)
: 40-900
 
Flange
 
 
accommodation
: PN 6/10/16
   
ANSI 150
   
JIS 5K/10K
   
0条 [查看全部]  【OPtiseal F14 F16 F15 F17蝶阀 阀座】相关评论
 
更多..本企业其它产品
 
更多..推荐产品

[ 供应搜索 ]  [ ]  [ 告诉好友 ]  [ 打印本文 ]  [ 关闭窗口 ]

 
站内信(0)     新对话(0)