橡胶塑胶硬度计式应用于测轮胎、海绵、橡胶、塑胶产品极佳的测定器。使用方法Howtouse计测面与本体垂直,押下即可。计测面和加压盘不可有间隙、计测的素材的厚度要12mm以上5点求取平均值仕样Specifications硬度指示:1目盛1度许容误差:1度重 量:约280g型号标准规格用途试验荷重押针型式TypeNAJISK6301一般橡胶539-8379mN(55-855gf)WR-102NA:标准型WR-202NA:置针型TypeNCJISK6301硬质橡胶980-44,100mN(100-4,500gf)WR-106NA:标准型WR-2062NA:置针型TypeAJISK6253ISO7619ASTMD2240一般橡胶550-8,050mN(56.1-821.1gf)WR-1042A:标准型WR-204A:置针型TypeDJISK6253ISO7619ASTMD2240塑胶.硬质橡胶0-44,450mN(0-4,533gf)WR-105D:标准型WR-205D:置针型TypeEJISK6253软质橡胶550-8050mN(56.1-821.1gf)WR-107E:标准型WR-207E:置针型Type7AJISK7215ISOR868AASTMD2240塑胶549-8,061mN(56-822gf)WR-1037A:标准型WR-2037A:置针型TypeSASRIS0101JISS6050软质橡胶539-8,385mN(55-855gf)WR-101SA:标准型WR-201SA:置针型