点击图片查看原图
工作部分采用压铸铝和聚碳酸酯的滑面。
（新型号未翻译）
Lock button with scale for micro adjustment of depth in 0.2 mm increments and possibility to trench.
Practical spindle lock button eases bit changing.
Base of die-cast alu and face of smooth gliding POLYCARBONATE.
Powerful universal motor with 27,500 rpm.
Fitted with a vacuum cleaner or dust extractor adapter, for use in a dust-free environment. We recommend the use of our vacuum cleaner controller AS/E.
Sturdy parallel and circle jig made of die-cast alu (with centring pin).
Ideal for slotting, rounding over, counter boring, and stock removal
in wood, plastic, Perspex, MDF, ceilings and many more.
Supplied with six triple slit MICROMOT steel collets 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm and closure nut. Base and table made of die-cast alu. Upper part made of glassfibre reinforced POLYAMIDE.
Technical Data:Runs at 27,500 rpm (no load). Mains voltage 220 - 240 V. 130 W max. Milling depth up to 20 mm. Footprint 70 x 100 mm. Height 170 mm. Weight 1400 g. Insulated to class 2. NO 28 568Wood Router Cutters Made of molybdenum-chrome vanadium steel. Used in the manufacture of picture frames, for sloting and various profiles. Inverse relief ground for cleaner cuts. All shafts 3.2 mm.
| Slot cutterDiameter 3.2 mm | ||||||
| Slot cutterDiameter 5.0 mm | ||||||
| Slot cutterDiameter 6.5 mm | ||||||
| Rounding over cutterDiameter 6.4 mm | ||||||
| V-slot cutterDiameter 6.5 mm | ||||||
| Combi cutter6.5/2.5 mm | ||||||
| Core box bit3.2 mm radius | ||||||
| Rebating cutter6.4 mm | ||||||
| Edge cutter with pinDiameter 5.0 mm | ||||||
| Half round cutterDiameter 13 mm |
