类型:失电制动器 | 尺寸:外径300MM |
用途:制动,防险 |
三、外形及安装尺寸(Overall and lnstallation Dimensions)
尺寸Size规格Specifications | d | D1 | D2 | D3 | D4 | L1 | L2 | L3 | L4 | KxM | h | b | |
LDZ1-200 | 53 | 265 | 244 | 220 | 140 | 75 | 32 | 40 | 3.5 | 4xM10 | 57.3 | 16 | 0.6 |
LDZ1-300 | 59 | 310 | 280 | 254 | 170 | 90 | 38 | 50 | 3.5 | 4xM12 | 63.4 | 18 | 0.8 |
LDZ1-450 | 65 | 330 | 300 | 274 | 180 | 95 | 40 | 56 | 3.5 | 4xM12 | 69.4 | 18 | 0.8 |
LDZ1-600 | 65 | 380 | 350 | 305 | 180 | 100 | 46 | 56 | 4 | 4xM16 | 69.4 | 18 | 0.8 |
LDZ1-850 | 68 | 422 | 390 | 350 | 195 | 120 | 48 | 62 | 4 | 6xM16 | 72.4 | 18 | 1.0 |
LDZ1-2000 | 80 | 490 | 460 | 425 | 255 | 130 | 52 | 62 | 7.5 | 8xM16 | 85.4 | 22 | 1.0 |
LDZ1-4000 | 100 | 616 | 580 | 540 | 350 | 175 | 60 | 92 | 7.5 | 10xM16 | 106.4 | 28 | 1.2 |
LDZ1-6000 | 120 | 705 | 660 | 605 | 420 | 220 | 94 | 110 | 8 | 6xM20 | 127.4 | 32 | 1.5 |
安装注意事项 Warning
●摩擦片及衔铁表面不得有油污,必须保持清洁;
Friction disc and armature surface should be kept clean and free of grease.
●安装时必须保证气隙 ;
When fixing, the airgap should be kept to the specified value.
●齿轮套不得有轴向窜动。
The gear hub are not allowed to move along axially.
●安装后必须旋出空心螺栓锁紧在电机后端盖或法兰盘上。
Turn the hollow bolt so that it is fixed on the bake cover or the flange plate.