车 削CUTTING钻 铣 削 DRILLING MILLING床身上最大工件回转直径Max.swing diameter over bed300mm最大钻孔直径Max.drilling capacity20mm最大工件长度Max.length of workpiece650mm主轴端面至工作台面距离Disrance from bench to spindle nose240—320mm刀架上最大工件回转直径Swing diameter over tool carrier140mm主轴通孔直径spindle bore26mm主轴孔莫氏锥度Taper of hole in spindle morseNo.4主轴中心线至立柱回转表面距离Distance between spindle centre and the surface of column310mm刀架最大横向行程Max.cross storke over small tool carrier200mm小刀架最大纵向行程Max.longitudinal stroke over small tool carrier80mm加工公制螺纹种数Metric thread kinds on processing14钻铣头箱绕立柱回转角度Swivel-angle of milling and drilling headstock around the column360度加工英制螺纹种数Inch thread kind on processing20加工公制螺纹螺距范围Metric thread pitch on processing0.5-3mm加工英制螺纹螺距范围Inch thread pitch on processing11-40 1/n分钻铣头箱垂直升降行程Milling drilling headstock vertical stroke80mm纵向进给量级数Longitudinal feed grade20横向进给量级数Cross feed grade20主轴转速级数Spindle speed step9主轴每转刀架的纵向进给量Longitudinal feed on spindle tool carrier0.036-1.43mm主轴转速范围Spindle speed scope315-2000r/min主轴每转刀架的横向进给量Coss feed on spindle tool carrier0.003-0.134mm工作台面尺寸Bench dimension150*425mm尾座套筒的最大移动量Max.sroke of tailstock sleeve50mm电机Electric motor370W220V，50Hz(110V,60Hz)主轴转速级数Spindle speed step6其它OTHERS主轴转速度范围Spindle speed scope160-1600r/min净重Net weight240Kg电机Electric motor550W220V，50Hz(110V,60Hz)外型尺寸Overall dimension130*55*74mm选购购件SPECIAL OPTIONAL ACCESSORIES中心架 Steady rest1set跟刀架 Follow rest1set花盘 Face plate1set四爪卡盘 Four jaw chuck1set平口钳 Maching vice1set组合车刀 Turning tool set1set铣刀盘 Face mill cutter1set方箱 Step block1pc工具柜 Tool-box1set